Fascia boards are the horizontal boards that run along the edge of your roof where gutters attach. They're the visible face of your roofline and they take the worst of the weather — direct sun, rain, gutter overflow, and in cold climates, ice dam melt. When fascia rots or fails, it doesn't just look bad: gutters begin pulling away from the house, water tracks behind the eave, and soffit panels lose their upper attachment point.
Replacing fascia is typically a 1–2 day project for a full perimeter, and the cost depends heavily on which material you choose and whether rafter tails or subfascia underneath have also been compromised. Here's what homeowners actually pay, based on the estimates Soffit Fascia Repair's network of contractors writes every week.
Fascia Replacement Cost — Quick Summary
| Scope | Typical Cost Range |
|---|---|
| Single run (20–30 LF) | $250–$600 |
| One side of home (40–60 LF) | $450–$1,100 |
| Full perimeter, small home (<1,500 sq ft) | $1,200–$2,500 |
| Full perimeter, average home (1,500–2,500 sq ft) | $1,800–$4,000 |
| Rafter tail replacement add-on (per tail) | $150–$400 each |
Cost by Fascia Material
Material choice is the second-biggest factor in fascia replacement cost — labor hours are similar across materials, so the spread comes from the material cost itself and any added complexity in installation.
| Material | Installed Cost (per LF) | Expected Lifespan |
|---|---|---|
| Wood (pine or cedar) | $8–$15/LF | 15–25 years (painted) |
| Aluminum (wrapped or solid) | $10–$18/LF | 30–50 years |
| PVC / cellular vinyl | $9–$16/LF | 25–35 years |
| Fiber cement (HardieTrim) | $12–$20/LF | 30–50 years |
Best choice in most situations: Aluminum-wrapped or solid aluminum fascia offers the best balance of cost and longevity for most US climates. In coastal Florida and Gulf Coast environments, aluminum is the recommended upgrade from wood because it doesn't absorb salt moisture and doesn't require painting cycles. PVC is a sound mid-range option for dry or moderate climates.
What Drives Fascia Replacement Cost
Gutter Removal and Reinstallation
Fascia replacement requires removing the gutters first — gutters are hung directly on the fascia face. This isn't a separate job; most fascia contractors handle gutter removal and reinstallation as part of the work. If you have existing gutters in good shape, they go back up. If the gutters are showing age or damage, this is the moment to replace them — doing it separately adds a second mobilization charge and means the gutters go back on old fascia temporarily.
Rafter Tail Condition
The fascia board attaches to the ends of rafter tails — the structural members that extend beyond the wall of the house to form the eave overhang. When fascia rots, moisture often migrates behind it and into the rafter tails. Rotted rafter tails require sistering (attaching new lumber alongside the damaged member) or tail replacement before new fascia can be properly secured.
This structural work adds $150–$400 per tail. Most homes have rafter tails spaced 16–24 inches apart — a 40-foot run has approximately 20–30 tails. Expect 2–5 rafter tail replacements on a typical full-perimeter fascia job where moisture damage was moderate. Severe cases can require more.
Home Height and Access
Single-story fascia work from a standard ladder is straightforward. Two-story and higher work requires extension ladders or scaffolding and increases labor cost by 25–50%. Homes with tight side yards that prevent safe ladder setup may also require scaffolding for those elevations.
Existing Soffit Condition
Fascia and soffit replacement are frequently done together because they're adjacent systems and because replacing fascia involves disturbing the soffit edge. If your soffit is in poor condition, combining both projects in one visit saves a second mobilization charge and produces a visually consistent result. See our soffit replacement cost guide for the combined project economics.
When to Replace Fascia — Not Just Repair
Small sections of rotted fascia can sometimes be cut out and spliced — a carpenter fills the gap with new material, primes and paints, and the repair is invisible. This works when the rot is isolated, the rest of the board is sound, and paint adhesion on the adjacent sections is still good.
Replacement becomes the better call when:
- Rot affects more than 30% of the board's length
- Paint is failing in multiple sections across the same run
- The underlying rafter tails show moisture staining
- The home is going on the market — buyers' inspectors will flag soft fascia
- The existing material is original wood and the home is 20+ years old
Should Gutters Be Replaced at the Same Time?
If the gutters are over 20 years old, showing any separation at seams, or running lower on one end than the other, replace them during the same visit. Gutters have to come off for fascia work regardless — reinstalling the same gutters on new fascia and then having to remove them again in a year to replace the gutters means paying the labor twice.
Aluminum seamless gutters add $800–$1,800 to a full-perimeter fascia job depending on home size. For a combined fascia and gutter project, expect $2,500–$5,500 for most single-story homes. See the full gutter installation cost guide for a detailed breakdown.
Frequently Asked Questions About Fascia Replacement Cost
How much does fascia board replacement cost per linear foot?
Fascia board replacement costs $8–$20 per linear foot installed depending on material. Aluminum runs $10–$18/LF, wood runs $8–$15/LF, PVC runs $9–$16/LF, and fiber cement runs $12–$20/LF. A typical 1,500–2,000 sq ft home has 150–250 linear feet of fascia perimeter.
Do I need to replace fascia and soffit at the same time?
Not always, but it's often practical. Soffit panels attach to the fascia board at the outer edge — replacing fascia means disturbing that connection anyway. If the soffit is aging or mismatched in color, combining both projects in one visit saves a second mobilization charge and produces a consistent finished appearance.
Should gutters be replaced at the same time as fascia?
Yes, if the gutters are over 15–20 years old or showing failure. Gutters are hung directly on the fascia. Replacing fascia means removing them — if the gutters fail the following year, you pay for the labor to remove and reinstall them a second time. Combining both projects saves that cost.
What causes fascia boards to rot?
The most common cause is gutter overflow — when gutters are clogged or improperly pitched, water runs over the front edge and sits against the fascia face instead of flowing to the downspout. Repeated wet/dry cycles saturate the wood, paint adhesion fails, and rot follows within a few seasons. Fixing the gutter problem at the same time as the fascia is essential.
How long does fascia board replacement last?
Aluminum fascia lasts 30–50 years with minimal maintenance — it doesn't rot and doesn't require painting. Wood fascia lasts 15–25 years with proper painting cycles (every 5–7 years). In coastal Florida and Gulf Coast environments, aluminum is strongly preferred because wood deteriorates under continuous salt air exposure faster than the paint cycle can protect it.